icarusdragon

would it be possible to add a 300 watt bass bin to this in bridged mode to help with the peaking or would this only add to the problerm?? i'm thinking of getting a dimension 4 at the moment i am runnig 2 sound labs 15" 200rms speakers but i am upgrading the bass bins to 200watt rms 8 ohms so should be putting out approx 250-300 watts rms at 8ohm plus adding a single 15" 300 watt 8 ohms bass bin for added punch would this amp kick it http://www.dj-forum.co.uk/html//emoticons/thanks.gif

Hi guys been doing the odd disco and upto now not been to bad.http://www.dj-forum.co.uk/html//emoticons/biggrin.gif Would like to improve on my dying skills and technique would be gratful if any of you guys are about in Liecestershire. would like to tag along if that's possible and hopefully pass on the training to any new guys later on in the Leicestershire area http://www.dj-forum.co.uk/html//emoticons/cool.gif email me and I will check if i am free. I ahve a couple of gig's for this monthand next but other than that nothing in stone. http://www.dj-forum.co.uk/html//emoticons/071.gi

Hi guys not been on for a while. http://www.dj-forum.co.uk/html//emoticons/042.gif Been busy. http://www.dj-forum.co.uk/html//emoticons/cool.gif Started out begining of june with a football pres night that went down well, have done two birthday partys since for children. Just did a 60th Birthday plus retirment party on saturday just gone that was hard work, http://www.dj-forum.co.uk/html//emoticons/sterb188.gif trying to keep the dance floor busy was not easy . just clarify i play a lot of cheese it's what i get asked for and to be honest it all ways sdeems to get the floor going wi

Got emergency call thurday asking if I could do a disco for a 13th birthday http://www.dj-forum.co.uk/html//emoticons/rolleyes.gif As I was not realy prepared to do any gigs until this friday i umed nad ahh but agreed asa favour. Not bad for a rushed job and was good practice. floor was filled in short bursts but. But had a few problems alog the way, could not see the lights to well as the party host kept the lights on all the time http://www.dj-forum.co.uk/html//emoticons/wacko.gif never mind spoke to birthday boys mum next day and all had a good time. http://www.dj-forum.co.uk/html//e

Bought two Wild Flower lights I think they were skytronic and also Derby disco light. Can any one tell me how I could connect these to a basic lighting controller to create a good lighting effect also have a pair of 4 light sequencers that would like to add to controller(bought these from maplins). Is what I am asking possible. if not, how can I make the best effect of what I have got. http://www.dj-forum.co.uk/html//emoticons/goodjob.gif Only doing small venue at moment. http://www.dj-forum.co.uk/html//emoticons/thanks.gif

digital disco like the idea of using UPS what would you suggested rating wise for a dual cd deck at least 1000 watt amp and extras. Plus approx 4 lights just to keep the sjhow running for at least 10 mins while you get things underconntrol sound wise http://www.dj-forum.co.uk/html//emoticons/biggrin.gif

getting the Behringer 3200 processor does this inclued a limiter looked at info and not sure.

Sorted the problem. I really need to read the manual http://www.dj-forum.co.uk/html//emoticons/rolleyes.gif You have to hold the time button in for 2-3 sec to activate the fader start function for each cd deck http://www.dj-forum.co.uk/html//emoticons/biggrin.gif Not bad function will be usful when have the light and mic attached to the mixer. Thanks for the help guys anyway. Excellent site http://www.dj-forum.co.uk/html//emoticons/thumbup.gif

Cheese is back http://www.dj-forum.co.uk/html//emoticons/071.gif Ive been asked for the same for a sixtyeth Birthday bash http://www.dj-forum.co.uk/html//emoticons/bigstar.gif

Chris didn't relise the bass speaker was only 150 rms I thought they were 200rms if htis is the case I will replace both. http://www.dj-forum.co.uk/html//emoticons/rolleyes.gif The replacements from maplins of the same size approx 382mm are 350 wattt and am I right in thinking I will have to also replace the horns as well!! Also I am going to check the capasitor rating on the crossover on my other set of speakers to see if I can reduce the frequency going to the bass driver can you tell me do I need to go higher or lower in the capacitor rating to get more bass and less treble/high's

I may have a suspect faulty bass speaker how easy would it be to replace this with a equal if not better quality speaker This is the details, can I use ones available from maplins? Bass Driver: 382mm Impedance: 8 Ohm Peak Music Power: 400W Power: 200W(RMS) Frequency Response: 60-20000Hz http://www.dj-forum.co.uk/html//emoticons/thanks.gif

I agree with brian go for CD. http://www.dj-forum.co.uk/html//emoticons/thumbup.gif I use one turntable just for rare vinyl I have then 80% is split between CD and laptop.

Got my download from HMV and yes it will go in at numro uno http://www.dj-forum.co.uk/html//emoticons/beer.gif I also downloaded the Beverly knight single being used in th chocalote ad! Recon this could be a hit http://www.dj-forum.co.uk/html//emoticons/thumbup.gif Follows on nice to the Gnarles Berkley - Crazy single

Chris Just forgive me if I am being dumb but if I connected the soundlab speakers I bought the details are below, to my very low budget set that are 106 rms. can I connect these in series to get the 4ohms output of my Amp? Bass Driver - 381mm (15") Tweeter - 100 x 260mm Impedance - 8 Ohms Peak Music Power - 400W Power - 200W (RMS) Frequency Responce - 50-20000Hz Outputs - 6.35mm Jack socket Inputs - 6.35mm Jack socket Dims - 795 x 512 x 450mm

I haven't got a crossover at the moment but looking at getting one. Would like advice before buying one. Also need a little more understanding on where to place in the chain and components needed. I have tryed searching on line and get a rought idea but would still like it clarifying http://www.dj-forum.co.uk/html//emoticons/notworthy.gif