Paul Ireland 0 Posted November 29, 2009 Report Share Posted November 29, 2009 for Danger Mouse. I only have one amp in my one. On the top i have a light controller, mixer and cd player controls On the front i have a radio mic receiver, cd drawers and amp. I will admit it is quite heavy but it saves so much time when going into venues, no looking for tables and it's all connected just to plug in the speakers. It is alot deeper than i thought, you can fill the other side of it with equipment too so fairly deep. I manage lifting it because of the depth, lift one side then the other. www.limerickdj.com Link to post Share on other sites
Tommo55 0 Posted December 21, 2009 Report Share Posted December 21, 2009 I use a length of net wire between my two wind up lighting stands and drape over a black cloth printed with musical notes in white. Hides all the wires etc, can expand or retract if only half the rig is needed AND when the Pi:cense:ed guests start falling over :joe: the net wire bends with them so no damage is caused! Also folds up to the size of a towel and the wire wraps up so no weight and minimal storage space, and can be washed if anything gets spilled on it. Link to post Share on other sites
tezandbaz 0 Posted December 22, 2009 Report Share Posted December 22, 2009 i use a lighting panel,keep meaning to upgrade to something a bit more modern but is has some lighting control equipment built in and would need to be electrically redesigned.... two old codgers who at our age should know better.(G7AJG) Link to post Share on other sites
deltadaz 0 Posted December 25, 2009 Report Share Posted December 25, 2009 shower curtain held by two bungee cords hides everything plus you can stick any lights behind and get a nice lightscreen effect disco for cambridgeshire www.delta-discos.com Link to post Share on other sites
JohnnyLarge 0 Posted December 28, 2009 Report Share Posted December 28, 2009 Hi All Just browsing the posts and I found this thread. This i sthe front of my disco. The picture is a few years old and was taken prior to a Weddding function. Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now