Jump to content
Dj's United

Speakon(bridge)


Recommended Posts

i am gonna run 2 amps in bridge to drive a double 18" bass bin,the bridge input is a speakon connection,bridge is always positive to positve,but on a speakon connector theres a + and a minus,so do i just join both wires and put it into the plus,then plug it in?or can i use the normal speaker terminals,ie red to red?

Link to post
Share on other sites
>

perhaps you could clarify what you mean a bit more

 

you are going to use TWO amps to run one dual 18" cab?

 

also what make/model are the amps, some kick out on different terminals

 

 

bridge is always positive to positve, but on a speakon connector theres a + and a minus,so do i just join both wires and put it into the plus,then plug it in

 

i find this rather worrying, i think you need to expand more on the equipment being used

Link to post
Share on other sites

perhaps you could clarify what you mean a bit more

 

you are going to use TWO amps to run one dual 18" cab?

 

also what make/model are the amps, some kick out on different terminals

i find this rather worrying, i think you need to expand more on the equipment being used

 

lol,2 warrior is1000w amps will be used to drive 1 dual 18" bass bin which is 1200w rms,so 1 amp=1 speaker,2 amps=2 speakers,the speakers are wired on there own so i can run 2 amps to drive them.i did use a peavey cs800x in bridge mode on its own to drive this bass bin,but it keeps going thermol on me as its not got the power,the 2 warriors will give me a lot more head room(800w) so should be fine,just want to no how to wire the speakon connector!hope this kind of explains lol

Link to post
Share on other sites

as superstardeejay has mentioned, the is1000 has a bridge output

 

no special wiring needed

 

just go normal speakon to speakon +1 -1 to +1 -1, it even says this next to the Bridge Socket

 

 

 

i presume the drivers are 8 ohms each? If not, the warrior amp isnt designed for 4 ohms bridged

Link to post
Share on other sites

as superstardeejay has mentioned, the is1000 has a bridge output

 

no special wiring needed

 

just go normal speakon to speakon +1 -1 to +1 -1, it even says this next to the Bridge Socket

i presume the drivers are 8 ohms each? If not, the warrior amp isnt designed for 4 ohms bridged

 

thanks,i looked at the manual,bit confusing so normal connection it is then,yeah the drivers are 8 ohms each 600w rms,gonna use these amps saturday,bargain,2 brand new for £100,lets hope they are up to the job lol

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...