Jump to content
Dj's United

Microphone (cordless) Problems


Recommended Posts

We've just installed a uhf cordless mic into our flight case and there is lots of static when the mic is being moved around the room and on occasions just when moving the mic away from my face, this problem occurs regardless as to whether the mic is live or muted.

 

Any help would be appreciated, the mic is wms 40 pro single.

Link to post
Share on other sites

When you say squelched..what, you got interference, or the squelch triggered?

 

If the problem's loss of RF, then the squelch should capture it long before receiver noise makes it to the output. If it doesnt, either the squelch cct isnt working or its badly adjusted.

 

If the squelch is triggering legitimately, we must assume loss of (or poor) RF performance. If you're confident its ok when its well clear of the case, we must assume either there's something it doesnt like about it (ie its somehow shielding it or causing reflections for example) or else the setup has lost sensitivity and is more susceptible to such flightcase effects that it otherwise shouldn't be.

 

Have you got another transmitter with the same frequency, or can you borrow something that can be adjusted to the same frequency, just to prove a point? How old is it? Something as simple as an internally detached aerial connection can give poor RF performance, but really it could be anything at either end at this point.

 

 

 

 

 

 

 

.

Link to post
Share on other sites

When you say squelched..what, you got interference, or the squelch triggered?

 

If the problem's loss of RF, then the squelch should capture it long before receiver noise makes it to the output. If it doesnt, either the squelch cct isnt working or its badly adjusted.

 

If the squelch is triggering legitimately, we must assume loss of (or poor) RF performance. If you're confident its ok when its well clear of the case, we must assume either there's something it doesnt like about it (ie its somehow shielding it or causing reflections for example) or else the setup has lost sensitivity and is more susceptible to such flightcase effects that it otherwise shouldn't be.

 

Have you got another transmitter with the same frequency, or can you borrow something that can be adjusted to the same frequency, just to prove a point? How old is it? Something as simple as an internally detached aerial connection can give poor RF performance, but really it could be anything at either end at this point.

 

All sorted now, i got a gooseneck and attached mic into a holder and no more feedback. Thanks for your info much appreciated :joe:

Link to post
Share on other sites
there is lots of static when the mic is being moved

 

It squelched when just sitting in the case

 

 

no more feedback

 

 

So your problem was which...feedback...or static??

 

The point of this thread is lost on me!

 

.

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...