Jump to content
Dj's United

Datamoon Pcb Question


Recommended Posts

Hello,

 

I must admit I haven't posted for a while but having read the other datamoon threads I think I will ask for some help and advice.

 

I have two datamoons that I am giving the once over and both of them need a component replaced on the PCB, the location on the board is marked "C8" so I am guessing capacitors are required (can that be confirmed??), but can anyone tell me what rating these should be, and where I might get them from.

 

The 'moons in question are the ones built in china - if that makes any difference.

 

Thanks for the help,

 

Glenn.

Glenn Knights.

Mirage Moblile Disco

Wickham Market

Suffolk.

 

 

www.miragemobiledisco.co.uk

Link to post
Share on other sites
>

On mine, C8 is a 0.1uF ceramic capacitor, they may not be fitted on purpose as they are part of the HF input filter to the 5V IC regulator which usually work happily without. They've probably been left out as the resourceful chinese may have found out they don't need them.

Edited by superstardeejay

.

Link to post
Share on other sites

On mine, C8 is a 0.1uF ceramic capacitor, they may not be fitted on purpose as they are part of the HF input filter to the 5V IC regulator which usually work happily without. They've probably been left out as the resourceful chinese may have found out they don't need them.

 

Hi

 

Thanks for that.

 

The capacitors were there as I can see the remains of the old ones, however, given what you have said, do I actually need to get them replaced ?

 

Thanks again,

 

Glenn.

Glenn Knights.

Mirage Moblile Disco

Wickham Market

Suffolk.

 

 

www.miragemobiledisco.co.uk

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...