jimmy-c 0 Posted June 7, 2012 Report Share Posted June 7, 2012 hi everybody i was wandering if i could have a bit of help please ? i have got 2x dyna twins and 2x acme jaguars i have got the required dmx cable can these be dmx together and if so how do i set them up to work together? also is it safe if i got a twin plug and put 2 lights on it then used one iec to my lighting box so wen i turn one switch on both lights come on ?? Link to post Share on other sites
jimmy-c 0 Posted June 8, 2012 Author Report Share Posted June 8, 2012 any body??? Link to post Share on other sites
fester 0 Posted June 8, 2012 Report Share Posted June 8, 2012 If you mean can you you just link the twins and jaguars together with a dmx cable and run them master/slave then no you can't. The dynatwins and jaguars use different dmx addresses so it wouldn't work. You can still master/slave the dynatwins and master/slave the jaguars as 2 seperate light shows but you can't link all 4 together to make 1 light show. Regarding running 2 lights off 1 switch on your IEC switch box you need to find the total current rating of the 2 lights and then check how much current each channel on your switchpack can supply. The switchpack should have a fuse on each channel so if you try to overload it, it will pop the fuse. Craig Dance Sounds Disco http://www.discosheffield.co.uk Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now