Dmx And Lasers

[fender62 0]

i have three lasers, kam xy scanning, kam laserscan 300 rgb, equinox kamikaze, what effect would dmx them in a daisy chain, as there slightly different, specially the kam xy, if i dmx them together, what one would make the best master slave slave order, i don not have a controller yet

[superstardeejay 0]

You should really only master-slave lights that are specifically designed to be connected that way, unless serendipity means they have the same channel attributes and effects.

The best way would be to invest in a controller, set the lasers to slave/dmx and then design your programs to sync them if you wish with individual addressing.

The problem with DMX control of lasers is you're a bit limited in what you can do; professional lasers use a different protocol to allow sophisticated patterns and images.